Mining & Mineral Processing Equipment
Complete Plant Solutions for Mining and Mineral Processing
Crushing, grinding, beneficiation and drying equipment — engineered into complete production lines for gold, iron, copper, lead-zinc and construction aggregate projects.
30+
Years in equipment manufacturing
~100,000 m²
Own workshop in Gongyi, Henan
60+
Countries served
1 day
Typical reply to a technical enquiry
Mineral Processing
Start from your ore, not from a catalogue
Each ore type has its own route. Pick the material you are processing and see the ore types, the difficulties, the process sequence and the equipment that follows from it.
Gold Ore Processing Solutions
Equipment options for alluvial and hard-rock gold recovery, selected around ore characteristics, gold particle size and…
Alluvial gold · Free-milling · Sulfide-associated · Refractory
Iron Ore Beneficiation Solutions
Processing routes for magnetite, hematite and mixed iron ores, selected according to magnetic properties, liberation size…
Magnetite · Hematite · Limonite / Goethite · Mixed Ore
Copper Ore Processing
Different processing routes for sulfide, oxide and mixed copper ores – from crushing and grinding to flotation or…
Sulfide Copper · Oxide Copper · Mixed Ores · Equipment Matching
Chrome Ore Beneficiation
Chromite upgrading options based on Cr₂O₃ grade, Cr/Fe ratio, particle size, clay content and gangue mineralogy.
Cr₂O₃ Grade · Cr/Fe Ratio · Washing & Sizing · Gravity & Magnetic Separation
Tin Ore Processing
Cassiterite recovery options for alluvial and hard-rock tin ores, with attention to particle size, liberation and…
Alluvial · Hard-rock · Fine cassiterite · Gravity concentration
Manganese Ore Beneficiation
Ore-specific washing, gravity and magnetic separation options for oxide, siliceous, carbonate and ferruginous manganese ores.
Oxide · Siliceous · Carbonate · Ferruginous / Complex
Product Range
Equipment for every stage of the process
Five equipment groups, 44 models — supplied as single machines or as complete, matched production lines.
How We Work
From your requirement to a running plant
A clear four-step process, so you always know what happens next and who is responsible for it.
01
Requirement review
You send the material, feed size and target capacity. We confirm what the flowsheet has to achieve before any model is quoted.
02
Flowsheet & equipment selection
We size the crushers, mills and separators against your duty, then issue a model list with the parameters that matter.
03
Manufacturing & inspection
Production is followed against the agreed specification, with dimensional and performance checks before shipment.
04
Delivery & commissioning support
Packing, shipping documents and installation guidance — plus operator training and spare parts supply after start-up.
Technical Resources
Selection guides & technical notes
Why buyers keep coming back
Four things you can check before you send a deposit
Not four things we say about ourselves — four things that are on the site and that you can verify.
Engineers answer, not sales
A technical enquiry is read by a mechanical engineer. If the information we hold is not enough to answer properly, we ask rather than guess.
Records travel with the machine
Dimensional reports, material certificates by heat number, NDT reports and a test-run sheet with measured values — not a tick-box form.
Come and look
One hour by high-speed train from Zhengzhou. We will walk you through the machining, assembly and test-run areas and show the machines you are considering.
Guides that say when not to buy
Every equipment family has a selection guide that says which machine suits which duty — including the cases where the machine will not survive.