Mobile Sand Making Station
Wheel-mounted / Track-mounted
A mobile sand plant built around a VSI sand making machine. Crusher, screen and return conveyor sit on one chassis, so oversize recirculates automatically and finished sand comes off the belt. Suited to quarries needing extra sand capacity and to projects where the plant follows the material source.
- Crusher, screen and return conveyor on one chassis — closed-circuit sand production
- Oversize recirculates automatically, giving a higher yield than an open circuit
- Rock-on-rock chamber for shape and low wear; anvil chamber for finer product
Key features
- Crusher, screen and return conveyor on one chassis — closed-circuit sand production
- Oversize recirculates automatically, giving a higher yield than an open circuit
- Rock-on-rock chamber for shape and low wear; anvil chamber for finer product
- Adjustable impeller speed covers coarse to fine sand on one machine
- Run behind jaw or cone stations for a complete mobile line from feed to sand
- Suited to scattered deposits and projects with a fixed programme
Specifications
VSI Options and Capacity
| Installed VSI | Max. Feed Size (mm) | Capacity (t/h) | Drive Power (kW) |
|---|---|---|---|
| PCL-750 | 35 | 25–55 | 2×45 |
| PCL-900B | 40 | 65–130 | 2×75 |
| PCL-1050 | 45 | 100–160 | 2×(90–110) |
Selection note：The table lists normally fitted VSI units and their individual capacity. In closed circuit the finished sand output depends on the recirculating load and screening efficiency. The build is specified against your feed size and target fineness modulus.
Applications
- Adding sand capacity at a quarry
- Mobile sand supply for construction projects
- Aggregate shaping to reduce flaky content
- Sand from tailings and C&D waste
Options & configuration
- Chassis: wheel or track
- Chamber: rock-on-rock or rock-on-anvil
- Screen decks and apertures set to the product requirement
- Closed return conveyor
- Water spray dust suppression and integrated controls
Need help choosing a model?
Tell us the material and the target capacity — we will recommend the model and the supporting equipment that fit.